Home>
PLC>
Siemens PLCs SIMATIC S7-1500 Module 6ES7521-1BH50-0AA0 6ES7521-1BL00-0AB0

Siemens PLCs SIMATIC S7-1500 Module 6ES7521-1BH50-0AA0 6ES7521-1BL00-0AB0

Series#: Siemens PLC

Product Details

16 and 32-channel digital input modules
We are First Class Siemens Supplier,siemens plc dealer and Siemens plc distributor in China.
We can Supply Siemens automation parts,such as Siemens PLC,Siemens Servo Motor,Siemens HMI,Siemens VFD and So on,
100% Original and new,In stock by Siemens Automation
Delivery time: Ready in stock and 1 days for ship out
MOQ: 1pcs

Qty:

Add to Enquiry Cart

Specification

Download A Munual

Article number	6ES7521-1BH10-0AA0	6ES7521-1BL10-0AA0
	S7-1500, DI 16x24VDC BA	S7-1500, DI 32x24VDC BA
General information
Product type designation	DI 16 x 24 V DC BA	DI 32x24VDC BA
HW functional status	FS01	FS01
Firmware version	V1.0.0	V1.0.0
● FW update possible	Yes	Yes
Product function
● I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
● Isochronous mode	No	No
● Prioritized startup	Yes	Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V13 / V13	V13 / V13
● STEP 7 configurable/integrated from version	V5.5 SP3 / –	V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision	V1.0 / V5.1	V1.0 / V5.1
● PROFINET from GSD version/GSD revision	V2.3 / –	V2.3 / –
Operating mode
● DI	Yes	Yes
● Counter	No	No
● MSI	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Power
Power available from the backplane bus	1.05 W	1.05 W
Power loss
Power loss, typ.	1.8 W	3 W
Digital inputs
Number of digital inputs	16	32
Digital inputs, parameterizable	No	No
Source/sink input	P-reading	P-reading
Input characteristic curve in accordance with IEC 61131, type 3	Yes	Yes
Input voltage
● Rated value (DC)	24 V	24 V
— 24 V DC	Yes	Yes
● for signal “0”	-30 to +5 V	-30 to +5 V
● for signal “1”	+11 to +30V	+11 to +30V
Input current
● for signal “1”, typ.	2.7 mA	2.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	No	No
— at “0” to “1”, min.	3 ms	3 ms
— at “0” to “1”, max.	4 ms	4 ms
— at “1” to “0”, min.	3 ms	3 ms
— at “1” to “0”, max.	4 ms	4 ms
for interrupt inputs
— parameterizable	No	No
for technological functions
— parameterizable	No	No
Cable length
● shielded, max.	1 000 m	1 000 m
● unshielded, max.	600 m	600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Interrupts/diagnostics/status information
Diagnostics function	No	No
Alarms
● Diagnostic alarm	No	No
● Hardware interrupt	No	No
Diagnoses
● Monitoring the supply voltage	No	No
● Wire-break	No	No
● Short-circuit	No	No
Diagnostics indication LED
● RUN LED	Yes; green LED	Yes; green LED
● ERROR LED	Yes; red LED	Yes; red LED
● Monitoring of the supply voltage (PWR-LED)	No	No
● Channel status display	Yes; green LED	Yes; green LED
● for channel diagnostics	No	No
● for module diagnostics	No	No
Potential separation
Potential separation channels
● between the channels	No	No
● between the channels, in groups of	16	16
● between the channels and backplane bus	Yes	Yes
● between the channels and the power supply of the electronics		No
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No	No
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C	0 °C
● horizontal installation, max.	60 °C	60 °C
● vertical installation, min.	0 °C	0 °C
● vertical installation, max.	40 °C	40 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width	25 mm	25 mm
Height	147 mm	147 mm
Depth	129 mm	129 mm
Weights
Weight, approx.	230 g	260 g