After Hours Shipping
Real Time Order Tracking
Flexible Delivery Options
| Article number | 6ES7550-1AA00-0AB0 |
| S7-1500, TM Count 2x24V | |
| General information | |
| Product type designation | TM Count 2x24V |
| Firmware version | V1.3 |
|
● FW update possible
|
Yes |
| Product function | |
|
● I&M data
|
Yes; I&M0 to I&M3 |
|
● Isochronous mode
|
Yes |
| Engineering with | |
|
● STEP 7 TIA Portal configurable/integrated from version
|
V12 (FW V1.0) … V15 (FW V1.3)/V12 (FW V1.0), V13 (FW V1.1) |
|
● PROFIBUS from GSD version/GSD revision
|
GSD Revision 5 |
|
● PROFINET from GSD version/GSD revision
|
V2.3 / – |
| Installation type/mounting | |
| Rail mounting | Yes; S7-1500 mounting rail |
| Supply voltage | |
| Load voltage L+ | |
|
● Rated value (DC)
|
24 V |
|
● permissible range, lower limit (DC)
|
19.2 V |
|
● permissible range, upper limit (DC)
|
28.8 V |
|
● Reverse polarity protection
|
Yes |
| Input current | |
| Current consumption, max. | 75 mA; without load |
| Encoder supply | |
| Number of outputs | 1; A common 24V encoder supply for both channels |
| 24 V encoder supply | |
|
● 24 V
|
Yes; L+ (-0.8 V) |
|
● Short-circuit protection
|
Yes |
|
● Output current, max.
|
1 A; total current of all encoders/channels |
| Power | |
| Power available from the backplane bus | 1.3 W |
| Power loss | |
| Power loss, typ. | 4 W |
| Address area | |
| Address space per module | |
|
● Inputs
|
16 byte; Per channel |
|
● Outputs
|
12 byte; per channel; 4 bytes for Motion Control |
| Digital inputs | |
| Number of digital inputs | 6; 3 per channel |
| Digital inputs, parameterizable | Yes |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital input functions, parameterizable | |
|
● Gate start/stop
|
Yes |
|
● Capture
|
Yes |
|
● Synchronization
|
Yes |
|
● Freely usable digital input
|
Yes |
| Input voltage | |
|
● Type of input voltage
|
DC |
|
● Rated value (DC)
|
24 V |
|
● for signal “0”
|
-5 … +5 V |
|
● for signal “1”
|
+11 to +30V |
|
● permissible voltage at input, min.
|
-30 V; -5 V continuous, -30 V brief reverse polarity protection |
|
● permissible voltage at input, max.
|
30 V |
| Input current | |
|
● for signal “1”, typ.
|
2.5 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs | |
|
— parameterizable
|
Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms |
|
— at “0” to “1”, min.
|
6 µs; for parameterization “none” |
|
— at “1” to “0”, min.
|
6 µs; for parameterization “none” |
| for technological functions | |
|
— parameterizable
|
Yes |
| Cable length | |
|
● shielded, max.
|
1 000 m |
|
● unshielded, max.
|
600 m |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 4; 2 per channel |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes; electronic/thermal |
|
● Response threshold, typ.
|
1 A |
| Limitation of inductive shutdown voltage to | L+ (-33 V) |
| Controlling a digital input | Yes |
| Digital output functions, parameterizable | |
|
● Switching tripped by comparison values
|
Yes |
|
● Freely usable digital output
|
Yes |
| Switching capacity of the outputs | |
|
● with resistive load, max.
|
0.5 A; Per digital output |
|
● on lamp load, max.
|
5 W |
| Load resistance range | |
|
● lower limit
|
48 Ω |
|
● upper limit
|
12 kΩ |
| Output voltage | |
|
● Type of output voltage
|
DC |
|
● for signal “1”, min.
|
23.2 V; L+ (-0.8 V) |
English
Deutsch
한국어