After Hours Shipping
Real Time Order Tracking
Flexible Delivery Options
| Article number | 6ES7547-1JF00-0AB0 |
| S7-1500, CM 8xIO-Link | |
| General information | |
| Product type designation | CM 8xIO-Link |
| HW functional status | FS01 |
| Firmware version | V1.0.0 |
|
● FW update possible
|
Yes |
| Product function | |
|
● I&M data
|
Yes; I&M0 to I&M3 |
| Engineering with | |
|
● STEP 7 TIA Portal configurable/integrated from version
|
V15.1 with HSP 274 |
|
● STEP 7 configurable/integrated from version
|
Configurable via GSD file |
|
● PROFIBUS from GSD version/GSD revision
|
GSD as of Revision 5 |
|
● PROFINET from GSD version/GSD revision
|
GSDML V2.34 |
| Supply voltage | |
| Type of supply voltage | 24 V DC |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption, max. | 50 mA; without load |
| Encoder supply | |
| Number of outputs | 8 |
| Output current | |
|
● Rated value
|
1 A; 4 A total current per module |
| 24 V encoder supply | |
|
● Short-circuit protection
|
Yes; per channel, electronic |
| IO-Link | |
| Number of ports | 8 |
|
● of which simultaneously controllable
|
8 |
| IO-Link protocol 1.0 | Yes |
| IO-Link protocol 1.1 | Yes |
| Cycle time, min. | 2 ms |
| Size of process data, input per port | 33 byte; max. |
| Size of process data, input per module | 240 byte; max. |
| Size of process data, output per port | 32 byte; max. |
| Size of process data, output per module | 240 byte; max. |
| Memory size for device parameter | 2 kbyte; for each port |
| Master backup | Yes |
| Configuration without S7-PCT | Yes |
| Cable length unshielded, max. | 20 m |
| Operating modes | |
|
● IO-Link
|
Yes |
|
● DI
|
Yes |
|
● DQ
|
No |
| Time Based IO | |
|
— TIO IO-Link IN
|
No |
|
— TIO IO-Link OUT
|
No |
|
— TIO IO-Link IN/OUT
|
No |
| Connection of IO-Link devices | |
|
● Port type A
|
Yes |
|
● Port type B
|
Yes; 24 V DC via external terminal |
| Interrupts/diagnostics/status information | |
| Alarms | |
|
● Diagnostic alarm
|
Yes; The port diagnosis is available in the IO-Link mode only. |
| Diagnoses | |
|
● Monitoring the supply voltage
|
Yes |
|
● Wire-break
|
Yes |
|
● Short-circuit
|
Yes |
|
● Group error
|
Yes |
| Diagnostics indication LED | |
|
● Monitoring of the supply voltage (PWR-LED)
|
Yes; green LED |
|
● Channel status display
|
Yes; green LED |
|
● for channel diagnostics
|
Yes; red LED |
|
● for module diagnostics
|
Yes; red LED |
| Potential separation | |
| Potential separation channels | |
|
● between the channels
|
No |
|
● between the channels and backplane bus
|
Yes |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Ambient conditions | |
| Ambient temperature during operation | |
|
● horizontal installation, min.
|
0 °C |
|
● horizontal installation, max.
|
60 °C; Observe derating |
|
● vertical installation, min.
|
0 °C |
|
● vertical installation, max.
|
40 °C; Observe derating |
| Altitude during operation relating to sea level | |
|
● Installation altitude above sea level, max.
|
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
English
Deutsch
한국어